세이버투스 드라이버


   제품의 종류

Sabertooth dual 50A motor driver

 

 

Sabertooth dual 5A motor driver

Sabertooth dual 5A motor driver for RC

Sabertooth dual 10A motor driver

Sabertooth dual 12A motor driver for RC

Sabertooth dual 25A motor driver

Sabertooth dual 50A motor driver

 

Product Description

 

The Sabertooth 2X50HV is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for high powered robots - up to 120lbs in combat or 500lbs for general purpose robotics. Out of the box, the Sabertooth can supply two DC brushed motors with up to 50A each. Peak currents of 100A per channel are achievable for a few seconds. 

Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor. Sabertooth allows you to control two motors with: analog voltage, radio control, serial and packetized serial. You can build many different robots of increasing complexity for years to come with a Sabertooth. Sabertooth has independent and speed+direction operating modes, making it the ideal driver for differential drive (tank style) robots and more. The operating mode is set with the onboard DIP switches so there are no jumpers to lose. Sabertooth features screw terminal connectors - making it possible for you to build a robot without even soldering. The regenerative topology means that your batteries get recharged whenever you command your robot to slow down or reverse. Sabertooth has a built in Switching BEC that can provide up to 500mA of power to a microcontroller or R/C receiver. The lithium cutoff mode allows Sabertooth to operate safely with lithium ion and lithium polymer battery packs - the highest energy density batteries available. Sabertooth's transistors are switched at ultrasonic speeds (32kHz) for silent operation. 
Use of our motor drivers with cheap AC adapters is not recommended.
Use a battery or at least put a battery in parallel with a DC supply.

 

Product Specs

 

Model:

Sabertooth 2X50HV

Specifications:

50A continuous, 100A peak per channel.
12-48V nominal, 62V absolute maximum

Synchronous regenerative drive
Ultra-sonic switching frequency
Thermal and overcurrent protection
Lithium protection mode

Input modes: Analog, R/C, simplified serial, packetized serial

Size: 4.17” x 3.5” x 1.85”
106 x 90 x 47 mm

Documentation:

Sabertooth 2x50HV.doc (4.2mb)
Sabertooth 2x50HV.pdf (1.4mb)
Quick start guide.doc
Quick start guide.pdf
Sabertooth DIP Switch Wizard
Motor driver efficiency comparison Sample RPM versus throttle graph

Applications:

Combat robots up to 120lb
Normal and hobby robots up to 500lb
Differential drive robots
Electric vehicles, ride-on toys, scooters

Easy speed/direction control for pumps, conveyors, automation and any application that uses two brushed DC motors

Application notes:

Using a SyRen/Sabertooth with an ATX (or similar) DC power supply
Packetized mode with a PIC and Sabertooth

Using Sabertooth with Roborealm

 

 

Sabertooth 2X5 R/C

 

Sabertooth 2X10

 

 Sabertooth 2X10 R/C

 

Sabertooth 2X25

 

    
   Specifications comparision

 

 

Input Voltage(V)

Current (A)

Weight(g)

Size(mm)

6 to 18V

5A continuous per channel, 10 peak

19

45 x 40 x 13

6 to 18V

5A continuous per channel, 10 peak

18

45 x 40 x 13

Up to 18V

in: 10A continuous, 15A peak per channel.
24V in: 8A continuous, 10A continuous with additional heatsinking/airflow, 15A peak per channel

60

59 x 75 x 17

Up to 24V

in: 12A continuous, 25A peak per channel.
24V in: 10A continuous, 12A continuous with additional heatsinking/airflow, 25A peak per channel

43

 

6-24V nominal, 30V absolute maximum

25A continuous, 50A peak per channel.

96

65 x 80 x 20


12-48V nominal, 62V absolute maximum

  50A continuous, 100A peak per channel.

 292

 106 x 90 x 47


    페이지 처음으로